HP TeemTalk Terminal Emulator 7.0, User Manual

Page: 221 / 340

IBM 5250 Display Emulation
Record & Playback Keystrokes Facility 205
Record & Playback Keystrokes Facility
The record/playback keystrokes facility enables you to eliminate
repetitive operations by using the
Fn keys to store, retrieve and dis-
play data. The Fn keys can store a total of 1500 keystrokes. A
sequence of recorded keystrokes may be interrupted so that key-
strokes can be entered manually before continuing with the record-
ing or playback. Note that local
Fn key functions cannot be
recorded.
The keys used to initiate recording and playback are shown below
together with the equivalent virtual key names that can be used to
assign the functions to any key on the keyboard:
101/102 Key Keyboard Virtual Key Names
Record: Alt + F4 AS_RECORD
Pause: Shift + Pause AS_PAUSE
Quit: Alt + LControl AS_QUIT
Play: Alt + F5 AS_PLAY
Note: Quit is Alt + Left Control if Left Control is defined as the
Reset key.
Recording
Keystrokes
The following procedure describes how to record keystrokes.
1
Press Record to enter Record mode.
The status line will display RECRD and a number from 0 - 1500
indicating the number of new keystrokes that may be stored. A
series of boxes displayed to the right represent the
Fn keys. A
solid box indicates that the Fn key in that position is currently
storing recorded keystrokes.
2
Press the Fn key that will store the keystrokes. (On 101/102
keyboards you can also use Shift + Fn .)