HP TeemTalk Terminal Emulator 7.0, User Manual

Page: 20 / 340

Introduction
4 About This User's Manual
Appendix A: Programming Keys & Buttons
Describes how to program a key or button to generate
specific key functions and characters when pressed.
Appendix B: Virtual Key Names
Lists the virtual key names available for defining key
functions and including specific key functions in macro
definitions.
Appendix C: Product Specification
Describes the level of support provided by each
terminal emulation.
Terms &
Conventions
The following terms and conventions are used in this manual:
keys to press
When you need to press two or more keys together at the same time,
such as the
Shift key and the F4 key, this will be indicated by a plus
character between the key names. For example: Shift + F4 . The "+"
character does not represent a key to be pressed.
click
To "click" means to click the left mouse button once when the
mouse pointer is on a particular item on the display, such as an icon.
You should use the left mouse button unless specifically told other-
wise.
double-click
To "double-click" means to click the left mouse button twice in
quick succession when the mouse pointer is on a particular item on
the display, such as an icon. You should use the left mouse button
unless specifically told otherwise.
drag
To "drag" means to position the mouse pointer on an item on the
display (such as the edge of a window), then hold down the left
mouse button and move the mouse while keeping the button held
down.