HP TeemTalk Terminal Emulator 7.0, User Manual

Page: 182 / 340

IBM 3270 Display Emulation
166 Record & Playback Keystrokes Facility
Note: If you press a pre-recorded Fn key, its contents will be
replaced with the following keystrokes. You can also remove the
contents of the
Fn key before recording by pressing the Delete
key.
3
Enter the keystrokes to be recorded.
You may pause recording at any time to allow keystrokes to be
entered manually when played back by pressing
Pause . To con-
tinue recording, press Pause again.
Note: You can cancel the newly recorded keystrokes by pressing
the Quit key. This cancellation does not affect the previously
recorded keystrokes.
4
To finish and save the recording, press the Record key.
Playback
Keystrokes
You can play back the contents of an Fn key as normal or one
keystroke at a time. The following procedure describes normal
playback. For one keystroke playback, select
Single Step Macros
on
the
Notice Board Settings
tab of the
3270 Display Settings
dialog.
1
Position the text cursor where the playback is to start.
2
Press the Play key to enter Play mode.
The status line will display
PLAY
and a series of boxes represent-
ing the Fn keys. A solid box indicates that the Fn key in that
position is currently storing recorded keystrokes.
3
Press the Fn key storing the recorded data to playback.
Playback will begin immediately, as indicated by a P on the sta-
tus line. All the recorded keystrokes will be played back auto-
matically. When playback is completed the
P will disappear.