manualshive.com logo in svg

HP HP 8712ET, User Manual, Page: 372 / 480

Share
Download
HP HP 8712ET User Manual Download Page 372

8-80

ET User’s Guide

Hardkey/Softkey Reference

S

Softkey in the custom colors menu. Selects the item whose color you
want to customize on the external VGA monitor. Use the front panel
knob, the keypad, or the arrow keys to specify the item number you
want to customize.

See

“Using an External VGA Monitor” on page 4-86

 for more

information.

Access Keys:

Softkey in the

 menu. Displays softkeys for

menus related to service. Also includes

, which

displays instrument information.

See the Service Guide for more information.

Softkey in the service menu. Displays the menu of service functions.

See the Service Guide for details.

Access Keys:

Softkey in the system configure menu. Displays the menu to set the
real-time internal clock of the network analyzer and its format.

Access Keys:

Softkey in the set clock menu. Sets the day of the month.

Access Keys:

Softkey in the set clock menu. Sets the hour value on the clock.

Access Keys:

Softkey in the set clock menu. Sets the minute value on the clock.

Access Keys:

 Select Item

DISPLAY

 More Display  Color Options

 Custom Colors

 Service

SYSTEM OPTIONS

 Instrument Info

 Service Utilities

SYSTEM OPTIONS

 Service

 Set Clock

SYSTEM OPTIONS

 System Config

 Set Day

SYSTEM OPTIONS

 System Config  Set Clock

 Set Hour

SYSTEM OPTIONS

 System Config  Set Clock

 Set Minute

SYSTEM OPTIONS

 System Config  Set Clock

Summary of Contents for HP 8712ET

































































































































































































































































































































































































































































































Reviews:

No comments