manualshive.com logo in svg

HP HP 8712ET, User Manual, Page: 300 / 480

Share
Download
HP HP 8712ET User Manual Download Page 300

8-8

ET User’s Guide

Hardkey/Softkey Reference

A

Softkey in the

 menu. Displays the menu of measurements

suitable for amplifier measurements: transmission, reflection, and
power.

Softkey in the define graph menu. When annotation is on, printed or
plotted hardcopies will contain screen annotation such as the marker
readout that appears in the upper right corner of the display. When off,
the screen annotation is suppressed from the hardcopy.

Access Keys:

Softkey in the more display menu. Displays a menu that allows you to
customize the analyzer's display screen by enabling or disabling
annotation for the measurement channel, frequency, and markers.

See

“Customizing the Display” on page 4-45

 for more information.

Access Keys:

Softkey in the cal kit menu of 50 ohm instruments. Selects the type of
cal kit as APC-7.

See

“Calibration Kits” on page 6-16

 for more information.

Access Keys:

Softkey in the delay aperture menu, which is available when the
analyzer is in Delay format.

See

“Measuring Group Delay” on page 3-53

 for information on

aperture.

Access Keys:

Softkey in the delay aperture menu.

See

“Measuring Group Delay” on page 3-53

 for information on

aperture.

Access Keys:

 Amplifier

BEGIN

 Annotation

 ON off

HARDCOPY

 Define Hardcopy  Define Graph

 Annotation

 Options

DISPLAY

 More Display

 APC-7

CAL

 More Cal  Cal Kit

 Aperture (%)

AVG

 Delay Aperture

 Aperture (Hz)

AVG

 Delay Aperture

Summary of Contents for HP 8712ET

































































































































































































































































































































































































































































































Reviews:

No comments