
6-24
ET User’s Guide
Calibrating for Increased Measurement Accuracy
Calibration Kits
280
!
LOSS
2.2E+9 $ Ohms/Sec
290
!
300
END
How to download a calibration kit ASCII file. After creating a
calibration kit ASCII file, you can download the program by following
these steps:
NOTE
Calibration kit definitions must be in DOS format. LIF format is not
supported for cal kit definitions.
1. Insert the disk with the cal standard definitions into the analyzer's
built-in disk drive.
2. Press
and note the first word of the second line on
the screen. If it is not "INT:\" (for internal disk), press
.
3. Highlight the file (CALKIT, in the case of the Example Programs
Disk).
4. Press
and wait for the prompt:
Loaded cal kit information for 4 calibration standards
Recall of cal kit from CALKIT complete
5. Press
, and use the
front panel knob or the
keys to highlight the desired
port in the display’s table. Next, select the softkey that corresponds to
the User Cal Kit where the ASCII program stored the calibration kit
(default is User Cal Kit A).
NOTE
Cal kit coefficients are displayed in the cal kit block of the operating
parameters screen; press
;
press
a total of four times.
SAVE RECALL
Select Disk
Internal 3.5” Disk Prior Menu
Recall State
CAL
More Cal Cal Kit More Cal Kits
SYSTEM OPTIONS
Operating Parameters
Next Screen
Summary of Contents for HP 8712ET
