manualshive.com logo in svg

HP HP 8712ET, User Manual, Page: 169 / 480

Share
Download
HP HP 8712ET User Manual Download Page 169

ET User’s Guide

4-51

Using Instrument Functions

Customizing the Display

Measurement
Channel
Annotation

The measurement channel annotation at the top of the display screen
can be modified through the use of SCPI commands. See the Automating
Measurements User’s Guide Supplement for more information.

To turn the measurement channel annotation on or off, press

.

Frequency
Annotation

The frequency annotation at the bottom of the display (X-axis) can be
modified through the use of SCPI commands. See the Automating
Measurements User’s Guide Supplement for more information.

To turn the measurement channel annotation on or off, press

.

Marker Annotation

The marker annotation that appears in the upper right corner of the
display can be turned on or off by pressing

.

Marker Number

The marker numbers that appear above or below the marker symbols,
can be turned on or off by pressing

.

Y-Axis Annotation

Press

 to toggle the y-axis annotation and values: in

ABS

mode, the absolute value of each horizontal graticule line is indicated; in

REL

 mode, the value of each horizontal graticule line is indicated relative

to the value of the reference line.

To turn on or off the y-axis annotation, press

.

Limit Test
Pass/Fail Indicator

The limit test pass/fail indicator can be moved to any position on the
display screen. To move the position of the pass/fail indicator, press

. Use the

 and

 softkeys to

position the pass/fail indicator where desired.

To turn the pass/fail indicator text on or off, press

.

To enable or disable the display of the limit fail indicator,

, press

.

DISPLAY

 More Display  Annotation Options  Meas Annot ON off

DISPLAY

 More Display  Annotation Options  Freq Annot ON off

DISPLAY

 More Display

 Annotation Options  Mkr Annot ON off

DISPLAY

 More Display

 Annotation Options  Mkr Number ON off

DISPLAY

 More Display  Annotation Options

 Y-Axis Lbl rel ABS

DISPLAY

 More Display  Annotation Options  Y-Axis Lbl ON off

DISPLAY

 Limit Menu  Limit Options

 Limit Icon X Position

 Limit Icon Y Position

DISPLAY

 Limit Menu  Limit Options  Limit Text on OFF

DISPLAY

 Limit Menu  Limit Options  Limit Icon on OFF

Summary of Contents for HP 8712ET

































































































































































































































































































































































































































































































Reviews:

No comments