manualshive.com logo in svg

HP HP 8712ET, User Manual, Page: 349 / 480

Share
Download
HP HP 8712ET User Manual Download Page 349

ET User’s Guide

8-57

Hardkey/Softkey Reference

M

Softkey in the mkr limits menu. Toggle to ON if you want to enable
marker limit testing.

See

“To Use Marker Limit Functions” on page 4-32

 for more

information.

Access Keys:

Softkey in the limit menu. Displays the marker limits menu where
limit testing can be placed on statistics, flatness marker searches, and
delta amplitude or frequency.

See

“To Use Marker Limit Functions” on page 4-32

 for more

information.

Access Keys:

Softkey in the annotation options menu. Allows you to toggle the
marker numbers (but not the triangular indicators) on or off.

See

“Customizing the Display” on page 4-45

 for more information.

Access Keys:

Softkey in the define graph menu. When on (default setting), prints or
plots contain marker symbols.

NOTE

 or

 must

be selected for marker symbols to print or plot.

Access Keys:

Softkey in the define hardcopy menu. Defines the hardcopy output as a
table of marker values (frequency and amplitude).

Access Keys:

Softkey in the max search menu. Places the active marker at the
frequency point of maximum amplitude. If tracking is off, the marker
remains at that frequency. If tracking is on, the marker moves to the
maximum point with each sweep.

See

“Using Markers” on page 4-3

 for more information.

Access Keys:

 Mkr Limit

 on OFF

DISPLAY

 Limit Menu  Mkr Limits

 Mkr Limits

DISPLAY

 Limit Menu

 Mkr Number

 ON off

DISPLAY

 More Display  Annotation Options

 Mkr Symbol

 ON off

 Graph and Mkr Table

 Graph Only

HARDCOPY

 Define Hardcopy  Define Graph

 Mkr Table Only

HARDCOPY

 Define Hardcopy

 Mkr

−

> Max

MARKER

 Marker Search  Max Search

Summary of Contents for HP 8712ET

































































































































































































































































































































































































































































































Reviews:

No comments