
4-22
ET User’s Guide
Using Instrument Functions
Using Markers
To Use RF Filter
Statistics
The RF filter statistics function measures both the passband and the
stopband (reject-band) of a filter with a single sweep.
1. On measurement channel 1, press
and place marker 1 at
the beginning of the passband and marker 2 at the end of the
passband. Place markers 3 and 4 at the beginning and end of the
stopband. (When using measurement channel 2, use markers 5
through 8 to define the passband and stopband.)
2. Press
.
3. At the end of each sweep, this feature calculates the insertion loss
and peak-to-peak ripple of the passband, as well as the maximum
signal amplitude in the stopband. The insertion loss is defined as the
minimum point between markers 1 and 2 with respect to 0 dB. The
peak-to-peak ripple of the passband is defined as the difference
between the maximum and minimum points in the passband (as
defined by markers 1 and 2). The reject parameter is defined as the
difference between the minimum point in the passband and the
maximum point in the stopband.
4. See
for an example of an RF filter statistics search.
MARKER
Marker Functions Marker Math RF Filter Stats
Summary of Contents for HP 8712ET
