HP HP 8712ET, User Manual, Page: 31 / 480

ET User’s Guide 1-15
Installing the Analyzer
Step 4. Configure the Analyzer
Analyzer: Press ,
or .
The network analyzer's address will appear (the
default is 16). To change the address, press
,
.
To Configure
Peripheral
Settings If your system uses serial or parallel peripherals, follow the guidelines
below to configure the system. Refer to the peripheral's manual for
correct cables and settings. The parallel and serial ports have standard
Centronics DB-25 and RS232 pinouts respectively as explained in
Chapter 7, “Front/Rear Panel.”
Serial
Devices:
Press . Use the
entry controls to highlight your type of printer or
plotter, and press
. If the baud rate or
handshake at the top of the screen are incorrect, use
the softkeys to change them.
Parallel
Devices:
Press
.
Use the
entry controls to highlight your type of printer or
plotter, and press
.
LAN
Printer:
Press . Use the
entry controls to highlight
HP LaserJet PCL5/6
PCL5 LAN
, and press . If the printer IP
address at the top of the screen is incorrect, press
to enter the correct IP address.
NOTE
When is selected, the first two lines in the box at
the top of the display screen show the current settings.
NOTE
Use a PCL5 printer for fastest hardcopies. See “Configure the Hardcopy
Port” on page 4-70 for more information.
SYSTEM OPTIONS
HP-IB
HP 8712ET Address HP 8714ET Address
number
Enter
HARDCOPY
Select Copy Port
Select
HARDCOPY
Select Copy Port
Select
HARDCOPY
Select Copy Port
Select
LAN Printr IP Addr
Select Copy Port