manualshive.com logo in svg

HP HP 8712ET, User Manual, Page: 334 / 480

Share
Download
HP HP 8712ET User Manual Download Page 334

8-42

ET User’s Guide

Hardkey/Softkey Reference

I

I

Softkey in the

 menu. IBASIC menu choices

include run, continue, step, edit, key record, utilities, and IBASIC
display.

See the HP Instrument BASIC User's Handbook Supplement and the
Automating Measurements User’s Guide Supplement for more
information.

Softkey in the IBASIC menu. Displays a menu to select how to display
an IBASIC program.

See the HP Instrument BASIC User's Handbook Supplement for more
information.

Access Keys:

Softkey in the more format menu. Displays only the imaginary
(reactive) portion of the measured data on a Cartesian format. This
format is similar to the real format except that reactance data is
displayed on the trace instead of impedance data.

Access Keys:

Softkey in the

 menu. Displays impedance magnitude vs.

frequency on a Cartesian format.

See

“Measuring Impedance Magnitude” on page 3-63

 for more

information.

Access Keys:

Softkey in the IBASIC edit menu. Invokes the insert character menu
for editing IBASIC programs.

See the HP Instrument BASIC User's Handbook Supplement for more
information.

Access Keys:

 IBASIC

SYSTEM OPTIONS

 IBASIC Display

SYSTEM OPTIONS

 IBASIC

 Imaginary

FORMAT

 More Format

 Impedance

 Magnitude

FORMAT

FORMAT

 More Format

 Insert Char

SYSTEM OPTIONS

 IBASIC  Edit

Summary of Contents for HP 8712ET

































































































































































































































































































































































































































































































Reviews:

No comments