HP HP 8712ET, User Manual, Page: 359 / 480

ET User’s Guide 8-67
Hardkey/Softkey Reference
P
Softkey in the mod kit save/recall menu. Presets the selected User Cal
Kit to the type-N(f) calibration kit. This reduces the size of your saved
instrument state since the user-defined calibration kit isn’t included in
the saved information.
See “Calibration Kits” on page 6-16 for more information.
Access Keys:
Softkey in the more printer menu. Sets print width (printing space) in
mm.
See “Connecting and Configuring Printers and Plotters” on page 4-67
for more information.
Access Keys:
Softkey in the select copy port menu. Sets the recognized address of
HP-IB printers and plotters only. The default address is 5. The
"recognized HP-IB address" is the address that the network analyzer
uses to communicate with the device. The actual address of the device
must be set independently to match.
See “Connecting and Configuring Printers and Plotters” on page 4-67
for more information.
Access Keys:
Softkey in the more printer menu. Sets printer resolution in terms of
dots per inch. Check the printer manual for the appropriate setting.
Default is 96 dots per inch.
See “Connecting and Configuring Printers and Plotters” on page 4-67
for more information.
Access Keys:
Softkey in the menu. Displays the menu to save,
re-save, recall programs, or save a program as an autostart (AUTOST)
program.
See the HP Instrument BASIC User's Handbook Supplement for more
information.
Preset
User Kit
CAL
More Cal Cal Kit Modify (connector type)
Mod Kit SaveRecall
Print Width
HARDCOPY
Define Printer More Printer
Print/Plot
HP-IB Addr
HARDCOPY
Select Copy Port
Printer
Resolution
HARDCOPY
Define Printer More Printer
Programs
SAVE RECALL