manualshive.com logo in svg

HP HP 8712ET, User Manual, Page: 353 / 480

Share
Download
HP HP 8712ET User Manual Download Page 353

ET User’s Guide

8-61

Hardkey/Softkey Reference

N

Softkey in the max search menu. Moves the active marker to the next
nearest peak to the left.

See

“To Use Marker Search Functions” on page 4-6

 for more

information.

Access Keys:

Softkey in the max search menu. Moves the active marker to the next
nearest peak to the right.

See

“To Use Marker Search Functions” on page 4-6

 for more

information.

Access Keys:

Softkey in the select disk menu. Displays NFS devices which are
currently mounted. Select the device you want to use for save/recall
from the table and press the softkey that corresponds to the device.

See The LAN Interface User’s Guide Supplement for more information.

Access Keys:

Softkey in the LAN menu. Displays the NFS setup menu which allows
you to enter setup information for mounting NFS devices.

See The LAN Interface User’s Guide Supplement for more information.

Access Keys:

Softkey in the NFS setup menu. Displays a table listing the currently
mounted NFS devices.

See The LAN Interface User’s Guide Supplement for more information.

Access Keys:

Softkey in the select disk menu. Selects the analyzer's internal
non-volatile RAM as the location where information is saved, re-saved,
or recalled.

See

“Saving and Recalling Measurement Results” on page 4-55

 for

more information.

Access Keys:

 Next Peak Left

MARKER

 Marker Search  Max Search

 Next Peak Right

MARKER

 Marker Search  Max Search

 NFS Device

SAVE RECALL

 Select Disk

 NFS Device

 Setup

SYSTEM OPTIONS

 LAN

 NFS Device

 Table

SYSTEM OPTIONS

 LAN  NFS Device Setup

 Non-Vol

 RAM Disk

SAVE RECALL

 Select Disk

Summary of Contents for HP 8712ET

































































































































































































































































































































































































































































































Reviews:

No comments