
ET User’s Guide
4-35
Using Instrument Functions
Using Limit Testing
3. Use the front panel knob or the
keys to select
Delta
Ampl
in the marker limit test table. Turn this limit function on by
pressing the
key. Note that the entry in the
on/off column of the table changes to "on."
4. Press
, and enter the
maximum limit using the front panel keypad and terminating the
entry with the
key.
5. Press
, and
enter the minimum limit using the front panel keypad and
terminating the entry with the
key.
Delta Frequency
This marker limit test allows you to set marker 1 as a frequency
reference against which marker 2 is limit tested.
1. This limit test requires that you first use marker 1 to determine the
reference frequency: Press
, and then use the front
panel knob or the
keys to place marker 1 at the desired
place on the measurement trace. The frequency of marker 1 at this
point becomes the delta reference for this marker limit test.
2. Press
.
3. Use the front panel knob or the
keys to select
Delta
Freq
in the marker limit test table. Turn this limit function on by
pressing the
key. Note that the entry in the
on/off column of the table changes to "on."
4. Press
, and enter the
maximum limit using the front panel keypad and terminating the
entry with the
key.
5. Press
, and
enter the minimum limit using the front panel keypad and
terminating the entry with the
key.
Mkr Limit on OFF
Edit Limit (Min/Max) Max Limit
ENTER
Prior Menu Edit Limit (Min/Max) Min Limit
ENTER
MARKER
1:
DISPLAY
Limit Menu Mkr Limits
Mkr Limit on OFF
Edit Limit (Min/Max) Max Limit
ENTER
Prior Menu Edit Limit (Min/Max) Min Limit
ENTER
Summary of Contents for HP 8712ET
