manualshive.com logo in svg

HP HP 8712ET, User Manual, Page: 351 / 480

Share
Download
HP HP 8712ET User Manual Download Page 351

ET User’s Guide

8-59

Hardkey/Softkey Reference

M

Softkey in the set pen numbers menu. Sets the pen number
assignment for the hardcopy in monochrome plot mode.

See

“Connecting and Configuring Printers and Plotters” on page 4-67

for more information.

Access Keys:

Softkey in the NFS setup menu. Allows you to mount an NFS device
by entering the remote host name (or host IP address), the remote file
system path, and a local system path.

See The LAN Interface User’s Guide Supplement for more information.

Access Keys:

Softkey in the marker search more menu. Designed for use when
measuring multi-pole filters. Automatically searches the measurement
trace from left to right and positions up to 8 markers on consecutive
minimum points.

See

“To Use Marker Search Functions” on page 4-6

 for more

information.

Access Keys:

Softkey in the marker search more menu. Designed for use when
measuring multi-pole filters. Automatically searches the measurement
trace from left to right and positions up to 8 markers on consecutive
maximum points.

See

“To Use Marker Search Functions” on page 4-6

 for more

information.

Access Keys:

Softkey in the switching test set menu. Toggle to ON if you want to
configure the analyzer for use with a multiport test set.

Refer to the multiport test set User's and Service Guide for more
information.

Access Keys:

 Monochrome

 Pen

HARDCOPY

 Define Plotter  Set Pen Numbers

 Mount

 NFS Device

SYSTEM OPTIONS

 LAN  NFS Device Setup

 MultiNotch

MARKER

 Marker Search  More

 Multi Peak

MARKER

 Marker Search  More

 Multiport

 on OFF

SYSTEM OPTIONS

 System Config

 Switching Test Set

Summary of Contents for HP 8712ET

































































































































































































































































































































































































































































































Reviews:

No comments