HP HP 8712ET, User Manual, Page: 297 / 480

ET User’s Guide 8-5
Hardkey/Softkey Reference
A
A
Softkey in the narrowband internal menu. Selects the tuned receiver
measurement of input A.
See “Measuring Devices with Your Network Analyzer” on page 3-3 for
more information on input A.
Access keys: or ,
Softkey in the narrowband internal menu. Selects the tuned receiver
reflection measurement A/R.
See “Measuring Devices with Your Network Analyzer” on page 3-3 for
more information on measuring A/R.
Access keys: or ,
Softkey in the menu. Stops sending data from the
network analyzer to the hardcopy device.
NOTE
Hardcopy devices with large buffers may continue
to operate for quite a while after this command.
To stop such devices immediately, turn off power
to the hardcopy device.
Softkey in the do cal check menu. Stops the current cal check
procedure and returns to the cal check menu.
See Chapter 6 for more information on using cal check.
Access keys:
Softkey in the modify kit menu. Stops the current calibration kit
modification procedure and returns to the cal kit menu.
Access Keys:
A
MEAS 1 MEAS 2
Detection Options
Narrowband Internal
A/R
MEAS 1 MEAS 2
Detection Options
Narrowband Internal
Abort
HARDCOPY
Abort
Cal Check
CAL
Cal Check Do Cal Check
Abort Kit
CAL
More Cal Cal Kit
Modify (connector type)