manualshive.com logo in svg

HP HP 8712ET, User Manual, Page: 342 / 480

Share
Download
HP HP 8712ET User Manual Download Page 342

8-50

ET User’s Guide

Hardkey/Softkey Reference

L

Softkey in the automount setup menu and the mount NFS device
menu. Displays a dialog box for entering the local file system path for
an NFS device.

Access Keys:

or

This softkey also appears in the automount dev table menu and the
NFS device table menu. Displays an expanded version of the local file
system information found in the automount device table and the NFS
device table.

Access Keys:

or

 See The LAN Interface User’s Guide Supplement for more information.

Softkey in the LAN menu. Displays the users setup menu which allows
you to enter or delete a login user/password pair on the access list of
your analyzer.

 See The LAN Interface User’s Guide Supplement for more information.

Access Keys:

Softkey in the

 menu. Displays the logarithmic magnitude

of the data in dB. This is the default format.

Softkey in the open, short, load, and through menus. Allows you to
modify the loss characteristic of the open, short, load, or through
calibration standards in your calibration kit.

See

“Calibration Kits” on page 6-16

 for more information.

Access Keys:

,

 or

 or

 or

 Local Path

SYSTEM OPTIONS

 LAN  NFS Device Setup

 Automount Setup

 Mount NFS Device

SYSTEM OPTIONS

 LAN  NFS Device Setup

 NFS Device Table

SYSTEM OPTIONS

 LAN  NFS Device Setup

 Automount Setup  Automount Device Table

 Login User

 Setup

SYSTEM OPTIONS

 LAN

 Log Mag

FORMAT

 Loss

CAL

 More Cal  Cal Kit

 Modify (connector type)

 Open

 Short

 Load

 Thru

Summary of Contents for HP 8712ET

































































































































































































































































































































































































































































































Reviews:

No comments