manualshive.com logo in svg

HP HP 8712ET, User Manual, Page: 347 / 480

Share
Download
HP HP 8712ET User Manual Download Page 347

ET User’s Guide

8-55

Hardkey/Softkey Reference

M

Softkey in the system bandwidth menu. The default system bandwidth
is medium wide.

See

Chapter 5, “Optimizing Measurements”

 for information on how

system bandwidth can affect your measurements.

Access Keys:

Softkey in the system bandwidth menu. Medium wide is the default
system bandwidth.

See

Chapter 5

 for information on how system bandwidth can affect

your measurements.

Access Keys:

Softkey in the system bandwidth menu. The default system bandwidth
is medium wide.

See

Chapter 5

 for information on how system bandwidth can affect

your measurements.

Access Keys:

Softkey in the

 menu. Displays the trace memory of the

active measurement channel, using the current display format, scale,
and reference.

NOTE

Trace data must have been saved in memory

previously with

.

Softkey in the set pen numbers menu. Sets the pen number
assignment (color) for memory trace 1 on the hardcopy.

Access Keys:

Softkey in the set pen numbers menu. Sets the pen number
assignment (color) for memory trace 2 on the hardcopy.

Access Keys:

Hardkey in the SOURCE area. Displays the menu with source setting
selections: trigger functions, number of points, external reference, and
spur avoid features.

 Med Narrow

 1200 Hz

AVG

 System Bandwidth

 Med Wide

 4000 Hz

AVG

 System Bandwidth

 Medium

 3700 Hz

AVG

 System Bandwidth

 Memory

DISPLAY

 Data->Mem

 Memory 1 Pen

HARDCOPY

 Define Plotter  Set Pen Numbers

 Memory 2 Pen

HARDCOPY

 Define Plotter  Set Pen Numbers

MENU

Summary of Contents for HP 8712ET

































































































































































































































































































































































































































































































Reviews:

No comments