manualshive.com logo in svg

HP DDL D40, Reference Manual

Introducing the HP DDL D40, an exceptional device designed to revolutionize your digital experience. Unlock the full potential of this cutting-edge product with the comprehensive Reference Manual. Download this essential manual for free from manualshive.com and harness the power of the HP DDL D40.

Share
Download
background image

DDL Compiler Commands

Data Definition Language (DDL) Reference Manual — 426798-002

9- 80

OUT Command

CREATE EMPLOYEE 

RESET
SET FORMAT 1
SET TYPE K
SET KEYLEN 16
SET REC 16
SET BLOCK 4096
SET IBLOCK 4096
SET EXT( 4, 32 )
SET MAXEXTENTS 100
CREATE EMPLOYE0

OUT Command

The OUT command instructs the DDL compiler to list source lines on a listing 
destination different from the one specified in the DDL run command.

listing-destination

specifies where listing is sent, either as a file name or the name of an output 
device. If 

listing-destination

 is omitted, DDL lists the source lines at the 

destination specified in the DDL run command.

OUT Command Guidelines

The following points are guidelines for using the OUT command:

•

When you use the OUT command, DDL lists the entire compiler output (source 
lines and error messages) on the listing destination you specify in that command.   
DDL also lists error messages on the listing destination specified in the DDL run 
command.

•

The OUT command can be used anywhere within a DDL source file. Different 
portions of the listing can be written to different destinations.

•

If you use the OUT command in an interactive session to change the output device 
to a device other than your terminal, the session ceases to be interactive. As a 
result, you cannot use the EDIT command until a subsequent OUT command 
changes the output device back to your terminal.

•

If the listing destination you specify is an existing file, DDL appends the listing to 
the end of the existing file.

OUT [ listing-destination ]

Summary of Contents for DDL D40

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DDL D40

Samsung MZ-7PC128N User Manual preview
MZ-7PC128N
Brand: Samsung Pages: 59
TANDBERG Codian Remote Management API Reference Manual preview
Codian Remote Management API
Brand: TANDBERG Pages: 66
Nortel CC MIS User Manual preview
CC MIS
Brand: Nortel Pages: 374
MacroSystem Digital Video DVD-Arabesk 2 User Manual preview
DVD-Arabesk 2
Brand: MacroSystem Digital Video Pages: 28
AMX IREDIT V1.2 Instruction Manual preview
IREDIT V1.2
Brand: AMX Pages: 54
JETWAY MAGICTWIN XP Software Install Manual preview
MAGICTWIN XP
Brand: JETWAY Pages: 43
KINGDOM COMPUTER OPERATED VIDEO CAMERA SYSTEM Installation & User Manual preview
COMPUTER OPERATED VIDEO CAMERA SYSTEM
Brand: KINGDOM Pages: 21
Red Hat NETWORK 4.1.0 - Manual preview
NETWORK 4.1.0 -
Brand: Red Hat Pages: 40
Red Hat ENTERPRISE LINUX 4.5.0 - Reference Manual preview
ENTERPRISE LINUX 4.5.0 -
Brand: Red Hat Pages: 434
National Instruments BridgeVIEW User Manual preview
BridgeVIEW
Brand: National Instruments Pages: 455
Garmin 010-10844-00 - Mobile XT - GPS Software Owner'S Manual preview
010-10844-00 - Mobile XT - GPS Software
Brand: Garmin Pages: 52
Wavefactory TrackSpacer User Manual preview
TrackSpacer
Brand: Wavefactory Pages: 16
Waves Parametric Convolution Reverb IR-1 User Manual preview
Parametric Convolution Reverb IR-1
Brand: Waves Pages: 40
Acer RDM User Manual preview
RDM
Brand: Acer Pages: 4
FARONICS WINSELECT ENTERPRISE Manual preview
WINSELECT ENTERPRISE
Brand: FARONICS Pages: 39
Microdia MICRO-FLASH User Manual preview
MICRO-FLASH
Brand: Microdia Pages: 29
LEXIBOOK MFC105FR - WI-FI Installation preview
MFC105FR - WI-FI
Brand: LEXIBOOK Pages: 1
Xerox 6100BD - Phaser Color Laser Printer Installation And Operation Manual preview
6100BD - Phaser Color Laser Printer
Brand: Xerox Pages: 8

Brands by name

Popular brands

Load more brands