WARNING!
There is a risk of explosion,
fi
re, or personal injury if the battery pack is incorrectly replaced or
mistreated. To reduce the risk:
•
Do not attempt to recharge the battery outside of the controller.
•
Do not expose to water or temperatures higher than 60
˚
C.
•
Do not abuse, disassemble, crush, puncture, short external contacts, or dispose of in
fi
re or water.
•
Replace only with the HP spare designated for this product.
CAUTION:
Do not dispose of batteries, battery packs, and accumulators with general household waste. Use the
public collection system or return them to HP, your authorized HP Partners, or their agents.
NOTE:
•
Always replace batteries in pairs, not individually.
•
Temperature, age, and cache size can affect battery life. This time span also applies if the controller
cache module is removed from the array controller. When power is restored to the storage system, an
initialization process writes the preserved data to the hard drives. This is particularly important for
data that has been cached by a posted-write operation, but has not yet been written to the hard drives.
•
Batteries on a new controller might be discharged. In this case, a POST message is displayed on
the controller display panel when the controller is powered on, indicating that the controller cache
module is temporarily disabled. No user action is required, because internal circuitry automatically
recharges the batteries. Recharging the batteries can take up to four hours. The controller functions
properly during this time, although without the performance advantage of the controller cache
module. When the batteries are charged to 90 percent of their capacity, the controller cache module
is automatically enabled.
1.
Remove the controller as instructed in
Removing the controller
.
2.
Remove the controller cache module as instructed in
Removing the controller cache module
.
3.
Push down on the battery retaining clip, located near the lower corner of the module.
15516
4.
Swing the battery pack away from the cache module to about a 30-degree angle.
maintenance and service guide
81
Summary of Contents for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive
