HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive, Maintenance And Service Manual

Page: 51 / 120

Message Type
Description Action
112 VOLUME #<n>
REBUILD FAILURE
Error
The rebuild operation on
the con fi gured volume has
failed.
If the volume is still operating
in regenerative mode,
remove the new SCSI hard
drive that was added as a
replacement for the original
failed hard drive and replace
it with a different new drive.
113 VOLUME #<n>
EXPANSION FAILURE
Error
The volume expansion
operation on the con fi gured
volume has failed.
Open the Array
Con fi guration Utility (ACU)
or MSA Command Line
Interface (MSA-CLI) and use
it to determine the state of
the volume. If the volume is
still operational, it is possible
to retry the operation.
114 VOLUME #<n>
STATE DELETED
Informational The con fi gured volume has
been deleted and is no
longer available. Volumes
are deleted by using the
Array Con fi guration Utility
(ACU) or MSA Command
Line Interface (MSA-CLI).
115 VOLUME #<n>
MEDIA EXCHANGED
Informational All failed hard drives of the
speci fi ed volume have been
replaced by good hard
drives or all unplugged
hard drives in the volume
have been plugged back
in. This message should be
followed by message
02
ENABLE VOLUME <n>?
'<'=NO, '>'=YES
.
See the entry for
02 ENABLE
VOLUME <n>? '<'=NO,
'>'=YES
.
120 CONFIGURED
VOLUMES <n>
Informational The speci fi ed number of
con fi gured volumes was
detected at power-up.
121 NO VOLUMES
DETECTED
Informational No con fi gured volumes
were detected at power-up.
If there are supposed to be
con fi gured volumes, power
off the MSA and then all
attached storage enclosures.
Unplug and reinsert all SCSI
hard drives ensuring they
are fully seated in their bays.
Check the cables connecting
the MSA to any attached
storage enclosures. Power
on the attached enclosures
and then the MSA.
122 NEW VOLUME(S)
DETECTED
Informational Con fi gured volumes from
another array controller
were migrated to this
array controller. The
con fi guration information
has been updated.
maintenance and service guide
51