HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive, Maintenance And Service Manual

Page: 52 / 120

Message Type
Description Action
123 TOO MANY
VOLUMES DETECTED
Error
The array controller only
supports a maximum of
32 con fi gured volumes.
More volumes than that
were detected at power up.
This typically occurs when
migrating a set of volumes
from one array controller to
a different array controller
that already has con fi gured
volumes on it. The migrated
volumes have not been
added.
Remove the migrated
volumes and run the Array
Con fi guration Utility (ACU).
Delete any unneeded
volumes until the number
of existing volumes plus the
number of migrated volumes
is 32 or less. Add the
migrated volumes back.
124 SPARES CLEARED Informational A set of volumes has been
migrated from one array
controller to a different
array controller that already
has con fi gured volumes on
it. The migrated volumes
have spares de fi ned for
them that con fl ict with the
existing con fi guration. The
de fi ned spares have been
deleted so as to allow the
migration to proceed.
Run the Array Con fi guration
Utility (ACU) or MSA
Command Line Interface
(MSA-CLI) to reassign spare
hard drives as needed.
125 ACCESS CONTROL
CONFLICT DETECTED
Error
A set of volumes has been
migrated from one array
controller to a different
array controller that already
has con fi gured volumes on
it. The migrated volumes
have access controls
de fi ned for them that
con fl ict with the existing
con fi guration. The access
controls have been modi fi ed
so as to allow the migration
to proceed.
Run the Array Con fi guration
Utility (ACU) or MSA
Command Line Interface
(MSA-CLI) to check the new
access controls and modify
them if needed.
126 ACCESS CONTROL
RESOURCES EXCEEDED
Error
A set of volumes has been
migrated from one array
controller to a different
array controllers that
already has con fi gured
volumes on it. The migrated
volumes have access
controls de fi ned for them
that con fl ict with the existing
con fi guration. The access
controls have been modi fi ed
so as to allow the migration
to proceed.
Run the Array Con fi guration
Utility (ACU) or MSA
Command Line Interface
(MSA-CLI) to check the new
access controls and modify
them if needed.
150 BEACON ON Informational The LEDs on the MSA
and all connected hard
drives are blinking because
that array controller was
selected for identi fi cation
or con fi guration in a
host-based application such
as the ACU.
52
LCD panel and message descriptions