HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive, Maintenance And Service Manual

Page: 54 / 120

Message Type
Description Action
301 RECOVERY ROM
AUTOFLASH DONE
Informational The array controller has
successfully completed the
process of copying the
current active fi rmware
image into the backup
recovery ROM.
302 RECOVERY ROM
AUTOFLASH FAILED
Error
The array controller failed
to copy the current active
fi rmware image into the
backup recovery ROM.
Recovery ROM support is
disabled.
Remove the failing array
controller, wait 10 seconds,
and then reinsert the array
controller, ensuring that it is
fully seated in the chassis.
The ROM auto fl ash process
is attempted again.
Should the issue persist,
contact HP support.
303 ROM CLONING
STARTED
Informational In dual-controller MSA
only, this indicates that
the fi rmware from one of
the controllers is being
copied onto the other array
controller. Both controllers
must be running the same
version of fi rmware in order
for controller redundancy to
operate.
If both array controllers are
in the power-up sequence,
then the most recent version
of fi rmware will be used.
If one array controller has
already completed the
power-up sequence and is
active, then its version of
fi rmware will be used even
if less recent.
304 ROM CLONING
DONE
Informational
In dual-controller MSA only,
this indicates that the two
array controllers in an MSA
have fi nished copying one
array controller's version of
fi rmware to the other array
controller. Both controllers
must be running the same
version of fi rmware in order
for controller redundancy to
operate.
305 ROM CLONING
FAILED
Error
In dual-controller MSA
only, this indicates that the
two array controllers in an
MSA failed to copy one
array controller's version of
fi rmware to the other array
controller. Both controllers
must be running the same
version of fi rmware in order
for controller redundancy to
operate.
Remove the standby array
controller, wait 10 seconds,
and then reinsert the array
controller ensuring that it is
fully seated in the chassis.
The ROM cloning process is
attempted again.
Should the issue persist,
contact HP support.
54
LCD panel and message descriptions