HP A7500 Series Command Reference Manual Download Page 30

Page: 30 / 222

Field Description

total UI in use

Total number of user interfaces in use

display users

Syntax

display users

[

all

] [

{

begin

exclude

include

}

regular-expression

]

View

Any view

Default level

1: Monitor level

Parameters

all

: Displays information about all user interfaces that the device supports.

: Filters command output by specifying a regular expression. For more information about regular

expressions, see

Fundamentals Configuration Guide

begin

: Displays the first line that matches the specified regular expression and all lines that follow.

exclude

: Displays all lines that do not match the specified regular expression.

include

: Displays all lines that match the specified regular expression.

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use the

display users

command to display information about the user interfaces that are being used.

Use the

display users all

command to display information about all user interfaces supported by the

device.

Examples

# Display information about the user interfaces that are being used.

<Sysname> display users

The user application information of the user interface(s):

Idx UI Delay Type Userlevel

+ 18 VTY 0 00:00:00 TEL 3

19 VTY 1 00:02:34 TEL 3

Following are more details.

VTY 0 :

Location: 192.168.1.54

VTY 1 :

Location: 192.168.1.58

+ : Current operation user.

F : Current operation user work in async mode.

The output shows that two users have logged in to the device. The one with IP address 192.168.1.54 uses
VTY 0, and the other with IP address 192.168.1.58 uses VTY 1.

Summary of Contents for A7500 Series































































































































































































































Search results

Summary of Contents for A7500 Series

Reviews:

Related manuals for A7500 Series

Brands by name

Popular brands

HP A7500 Series, Command Reference Manual

Search results

Summary of Contents for A7500 Series

Reviews:

Related manuals for A7500 Series

Brands by name

Popular brands