31
Description
Use the
modem timer answer
command to set the maximum amount of time that the modem waits for the
carrier signal after the off-hook action during incoming call connection setup.
Use the
undo modem timer answer
command to restore the default.
Examples
# Set the maximum amount of time that the switch-side modem waits for the carrier signal after the
off-hook action to 45 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] modem timer answer 45
parity
Syntax
parity
{
even
|
mark
|
none
|
odd
|
space
}
undo parity
View
User interface view
Default level
2: System level
Parameters
even
: Performs an even parity check.
mark
: Performs a mark parity check.
none
: Performs no parity check.
odd
: Performs an odd parity check.
space
: Performs a space parity check.
Description
Use the
parity
command to set a parity check method.
Use the
undo parity
command to restore the default.
By default, no parity check is performed.
NOTE:
•
The command is only applicable to the asynchronous serial port (console port).
•
The parity check setting must be the same for the user interfaces of the connecting ports on the device
and the target terminal device for communication.
Examples
# Configure the Console port to perform odd parity check.
<Sysname> system-view
[Sysname] user-interface aux 0
Summary of Contents for A7500 Series
Page 7: ...v Index 210 ...
