manualshive.com logo in svg

HP A7500 Series, Command Reference Manual

The HP A7500 Series Configuration Manual is a comprehensive resource for users looking to optimize the performance of their HP A7500 Series product. This manual can be easily downloaded for free from manualshive.com, providing step-by-step instructions and valuable insights for efficient configuration and enhanced functionality.

Share
Download
background image

6 

exclude

: Displays all lines that do not match the specified regular expression. 

include

: Displays all lines that match the specified regular expression. 

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. 

Description 

Use the 

display hotkey

 command to display hotkey information. 

Examples 

# Display hotkey information. 

<Sysname> display hotkey 

----------------- HOTKEY ----------------- 

 

            =Defined hotkeys= 

Hotkeys Command 

CTRL_G  display current-configuration 

CTRL_L  display ip routing-table 

CTRL_O  undo debug all 

 

           =Undefined hotkeys= 

Hotkeys Command 

CTRL_T  NULL 

CTRL_U  NULL 

 

            =System hotkeys= 

Hotkeys Function 

CTRL_A  Move the cursor to the beginning of the current line. 

CTRL_B  Move the cursor one character left. 

CTRL_C  Stop current command function. 

CTRL_D  Erase current character. 

CTRL_E  Move the cursor to the end of the current line. 

CTRL_F  Move the cursor one character right. 

CTRL_H  Erase the character left of the cursor. 

CTRL_K  Kill outgoing connection. 

CTRL_N  Display the next command from the history buffer. 

CTRL_P  Display the previous command from the history buffer. 

CTRL_R  Redisplay the current line. 

CTRL_V  Paste text from the clipboard. 

CTRL_W  Delete the word left of the cursor. 

CTRL_X  Delete all characters up to the cursor. 

CTRL_Y  Delete all characters after the cursor. 

CTRL_Z  Return to the User View. 

CTRL_]  Kill incoming connection or redirect connection. 

ESC_B   Move the cursor one word back. 

ESC_D   Delete remainder of word. 

ESC_F   Move the cursor forward one word. 

ESC_N   Move the cursor down a line. 

ESC_P   Move the cursor up a line. 

ESC_<   Specify the beginning of clipboard. 

Summary of Contents for A7500 Series































































































































































































































Reviews:

No comments

Related manuals for A7500 Series

D-Link DGS-1224TP - Web Smart Switch User Manual preview
DGS-1224TP - Web Smart Switch
Brand: D-Link Pages: 52
D-Link DGS-1008P Quick Install Manual preview
DGS-1008P
Brand: D-Link Pages: 8
D-Link DES-3225G Series Technical Bulletin preview
DES-3225G Series
Brand: D-Link Pages: 3
D-Link DES-1228 - Web Smart Switch Manual preview
DES-1228 - Web Smart Switch
Brand: D-Link Pages: 69
D-Link DGS-1210-10P Reference Manual preview
DGS-1210-10P
Brand: D-Link Pages: 109
Barco DCS-100 Specifications preview
DCS-100
Brand: Barco Pages: 2
Gavita RS1 User Manual preview
RS1
Brand: Gavita Pages: 12
SIMON RWA HE 083 Brief Instruction preview
HE 083
Brand: SIMON RWA Pages: 3
UniFi USW-Flex-Mini Quick Start Manual preview
USW-Flex-Mini
Brand: UniFi Pages: 8
Fortinet FortiSwitch 424E Series Quick Start Manual preview
FortiSwitch 424E Series
Brand: Fortinet Pages: 11
Optex OAM-DUAL T Operation Manual preview
OAM-DUAL T
Brand: Optex Pages: 2
Hall Research Technologies KVMC-UH-8 User Manual preview
KVMC-UH-8
Brand: Hall Research Technologies Pages: 9
KYLAND Technology SICOM3028GP Series Hardware Installation Manual preview
SICOM3028GP Series
Brand: KYLAND Technology Pages: 40
DX Engineering RR8B-HP Manual preview
RR8B-HP
Brand: DX Engineering Pages: 4
Transition Networks SM24-1000SFP-AH Installation Manual preview
SM24-1000SFP-AH
Brand: Transition Networks Pages: 76
VXI Tuffset 200302F User Manual preview
Tuffset 200302F
Brand: VXI Pages: 2
Eaton TRIPP LITE U360-004-IND Owner'S Manual preview
TRIPP LITE U360-004-IND
Brand: Eaton Pages: 56
Eaton TRIPP LITE U460-003-3AG Owner'S Manual preview
TRIPP LITE U460-003-3AG
Brand: Eaton Pages: 32

Brands by name

Popular brands

Load more brands