manualshive.com logo in svg

HP A7500 Series, Command Reference Manual

The HP A7500 Series Configuration Manual is a comprehensive resource for users looking to optimize the performance of their HP A7500 Series product. This manual can be easily downloaded for free from manualshive.com, providing step-by-step instructions and valuable insights for efficient configuration and enhanced functionality.

Share
Download
background image

 

116 

Description 

Use the 

slave

 

auto-update

 

config 

command to enable the configuration file auto-save function. 

Use the 

undo slave

 

auto-update

 

config 

command to disable the function. 

By default, the configuration file auto-save function is enabled. 

Examples 

# Enable the configuration file auto-save function. 

<Sysname> system-view 

[Sysname] slave auto-update config 

startup saved-configuration 

Syntax 

startup

 

saved-configuration

 

cfgfile

 

undo startup saved-configuration 

View 

User view 

Default level 

3: Manage level 

Parameters 

cfgfile

: Configuration file name. The file must be a file with an extension .cfg stored in the storage 

media’s root directory. 

Description 

Use the 

startup saved-configuration

 command to specify a startup configuration file for the active MPU 

and standby MPU. (In standalone mode) 
Use the 

undo

 

startup saved-configuration 

command to configure the active MPU and standby MPU to 

start up with the null (factory) configuration. (In standalone mode) 
Use the 

startup saved-configuration

 command to specify a startup configuration file for each MPU of the 

IRF fabric. (In IRF mode) 
Use the 

undo

 

startup saved-configuration 

command to configure all the MPUs to start up with the null 

(factory) configuration. (In IRF mode) 
The startup configuration file of the active MPU and standby MPU must be the same. Before using the 

command, ensure that the specified configuration file has been saved to the root directory of the storage 
media of both the active MPU and standby MPU; otherwise, the command will fail. (In standalone mode) 
The startup configuration file of all MPUs of the IRF fabric must be the same. Before using the command, 

ensure that the specified configuration file has been saved to the root directory of the storage media of 

each MPU; otherwise, the command will fail. (In IRF mode) 
When you execute the 

undo

 

startup saved-configuration 

command and reboot the IRF fabric or an IRF 

member switch, the IRF fabric is partitioned. Use this command with caution. (In IRF mode) 
Related commands: 

display startup

. 

Examples 

1.

 

In standalone mode 

Summary of Contents for A7500 Series































































































































































































































Reviews:

No comments

Related manuals for A7500 Series

Datavideo SE-3000 Instruction Manual preview
SE-3000
Brand: Datavideo Pages: 58
FAAC 593 Quick Start Manual preview
593
Brand: FAAC Pages: 2
IOGear GCS62DP Quick Start Manual preview
GCS62DP
Brand: IOGear Pages: 10
LEGRAND HKRL20 Installation Manual preview
HKRL20
Brand: LEGRAND Pages: 30
H3C LSW1GP16P0 User Manual preview
LSW1GP16P0
Brand: H3C Pages: 26
Ruby Tech GS-2108C User Manual preview
GS-2108C
Brand: Ruby Tech Pages: 254
Sunix ESW-5162GP User Manual preview
ESW-5162GP
Brand: Sunix Pages: 55
socomec STATYS series Operating Manual preview
STATYS series
Brand: socomec Pages: 38
ICCN WX7020-1210G Web User Manual preview
WX7020-1210G
Brand: ICCN Pages: 48
Generac Power Systems TRANSFER SWITCH Warranty Information Booklet preview
TRANSFER SWITCH
Brand: Generac Power Systems Pages: 1
Shenzhen Kinan Technology KVM-1708A User Manual preview
KVM-1708A
Brand: Shenzhen Kinan Technology Pages: 27
NETGEAR ProSafe FS116 Installation Manual preview
ProSafe FS116
Brand: NETGEAR Pages: 2
S&C Alduti-Rupter Instructions For Operation preview
Alduti-Rupter
Brand: S&C Pages: 4
H3C PSR450-12A Manual preview
PSR450-12A
Brand: H3C Pages: 40
VXI Tuffset 200302F User Manual preview
Tuffset 200302F
Brand: VXI Pages: 2
Belkin BusStation F5U100, BusStation F5U100-BLU, BusStation FW100-SLV, BusStation F5U100-ORG User Manual preview
BusStation F5U100, BusStation F5U100-BLU, BusStation FW100-SLV, BusStation F5U100-ORG
Brand: Belkin Pages: 7
Velux ACTIVE with NETATMO Installation Instructions Manual preview
ACTIVE with NETATMO
Brand: Velux Pages: 20
CYP CDPS-U2HPIP Operation Manual preview
CDPS-U2HPIP
Brand: CYP Pages: 88

Brands by name

Popular brands

Load more brands