HP A7500 Series, Command Reference Manual

Page: 213 / 222

206
Parameters
time time-id : Time setting entry, where time-id is an integer ranging from 1 to 10. Every job can have up
to 10 time entries.
at time : Specifies the execution time, in the hh:mm format, where the hh value ranges from 0 to 23 and
the mm value ranges from 0 to 59.
one-off : Specifies that the specified command is executed only once.
repeating : Specifies a recurring time schedule.
date : Specifies the command execution date, in the MM/DD/YYYY or YYYY/MM/DD format. The YYYY
value ranges from 2000 to 2035, the MM value ranges from 1 to 12, and the DD value ranges from 1
to 31. The specified execution date must be ahead of the current date.
week-day week-daylist : Specifies the day or days to execute the specified command. You can specify
one day or up to seven days for week-daylist . Each day takes the value Mon , Tue , Wed , Thu , Fri , Sat , or
Sun , and must be separated by a space.
month-date month-day : Specifies a day of month to execute the specified command, where month-day
represents the day, an integer in the range 1 to 31.
command command : Specifies the command to be executed.
Description
Use the time at command to add an entry in the job schedule.
Use the undo time command to remove an entry from the job schedule.
Use Table 35 when you add commands in a job.
Table 35 Command schedule options
Command Description
time timeid at time date command
command
Schedules a command to run at a specific time and date. The
time or date must be later than the current system time or date.
time timeid one-off at time command
command
Schedules a command to run at a specific time on the current
day. If the specified time has passed, the command runs the next
day. The command runs only once.
time timeid one-off at time month-date
month-day command command
Schedules a command to run at a specific day in the current
month. If the specified time or day has passed, the command
runs in the next month.
The command runs only once.
time timeid one-off at time week-day
week-daylist
command
command
Schedules a command to run at a specific time on a specific day
or days in the current week. If the specified time or day has
passed, the command runs in the next week.
The command runs only once.
time timeid repeating at time command
command
Schedules a command to run at a specific time every day.
time timeid repeating at time month-date
month-day command command
Schedules a command to run on a specific day every month.
time timeid repeating at time week-day
week-daylist command command
Schedules a command to run at a specific time in a specific day
or days every week.