HP A7500 Series Command Reference Manual Download Page 102

Page: 102 / 222

The folder must be an empty one. If it is not empty, use the

delete

command to delete all files and

subfolders under it.
After you execute the

rmdir

command successfully, the files in the recycle bin in the folder will be

automatically deleted.

Examples

# Remove the

mydir

folder.

<Sysname> rmdir mydir

Rmdir flash:/mydir?[Y/N]:y

%Removed directory flash:/mydir.

umount

Syntax

umount

device

View

User view

Default level

3: Manage level

Parameters

device

: Name of a storage medium (for example flash or cf).

Description

Use the

umount

command to unmount a hot swappable storage medium, such as a CF card, excluding

flash. This command is effective only when the storage medium is in mounted state.
By default, a storage medium is automatically mounted and in the mounted state. You need to unmount

it before removing it from the device.
When mounting or unmounting a storage medium, or performing file operations on it, do not unplug or

switchover the storage medium or the card where the storage medium resides. Otherwise, the file system

could be damaged.
When a storage medium is connected to a lower version system, the system may not be able to recognize

the device automatically, and you need to use the

mount

command for the storage medium to function

normally.
Before removing a mounted storage medium from the system, first unmount it to avoid damaging the

device.
Related commands:

mount

Examples

In standalone mode

# Unmount a CF card of the active MPU.

<Sysname> umount cf:

% Umount cf: successfully.

%Apr 23 01:49:20:929 2011 Sysname VFS/5/LOG:

cf: umounted from slot 0.

Summary of Contents for A7500 Series































































































































































































































Search results

Summary of Contents for A7500 Series

Reviews:

Related manuals for A7500 Series

Brands by name

Popular brands

HP A7500 Series, Command Reference Manual

Search results

Summary of Contents for A7500 Series

Reviews:

Related manuals for A7500 Series

Brands by name

Popular brands