HP A7500 Series Command Reference Manual Download Page 82

Page: 82 / 222

// Download the file from the TFTP server to the root directory on the flash of the active MPU of the IRF

fabric.

<Sysname> tftp 192.168.1.26 get newest.app slot1#flash:/startup.app

File will be transferred in binary mode

Downloading file from remote TFTP server, please wait...|

TFTP: 2737556 bytes received in 14 second(s)

File downloaded successfully.

// Download the file from the TFTP server to the root directory on the flash of the standby MPU of the IRF
fabric.

tftp client source

Syntax

tftp client source

{

interface

interface-type interface-number

source-ip-address

}

undo tftp client source

View

System view

Default level

2: System level

Parameters

interface

interface-type interface-number

: Specifies the source interface for establishing TFTP

connections. The primary IP address of the source interface is used as the source IP address of packets

sent to a TFTP server. If the source interface has no primary IP address specified, no TFTP connection can

be established.

source-ip-address

: Specifies the source IP address of packets sent to a TFTP server, which is one of the

IP addresses configured on the device.

Description

Use the

tftp client source

command to specify the source IP address of packets sent to a TFTP server.

Use the

undo tftp client source

command to restore the default.

By default, the source IP address is the IP address of the output interface of the route to the server is used

as the source IP address..
If you use the

tftp client source

command to first configure a source interface and then a source IP address,

the source IP address overwrites the source interface, and vice versa.
If you first use the

tftp client source

command to specify a source IP address and then use the

tftp

command to specify another source IP address, the latter is used.
The source IP address specified with the

tftp client source

command applies to all TFTP connections while

the one specified with the

tftp

command applies to the current TFTP connection only.

Related commands:

display tftp client configuration

Examples

# Specify the source IP address of packets sent to a TFTP server as 2.2.2.2.

<Sysname> system-view

Summary of Contents for A7500 Series































































































































































































































Search results

Summary of Contents for A7500 Series

Reviews:

Related manuals for A7500 Series

Brands by name

Popular brands

HP A7500 Series, Command Reference Manual

Search results

Summary of Contents for A7500 Series

Reviews:

Related manuals for A7500 Series

Brands by name

Popular brands