17
******************************************************************************
<Sysname>
Trying 192.168.1.41 ...
Press CTRL+K to abort
Connected to 192.168.1.41 ...
******************************************************************************
* Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
<Sysname.41>
This operation is the same as directly logging in to the device at 192.168.1.41. If the Telnet connection to
192.168.1.41 is broken down, the Telnet connection to 192.168.1.40 breaks down at the same time.
authentication-mode
Syntax
authentication-mode
{
none
|
password
|
scheme
}
undo authentication-mode
View
User interface view
Default level
3: Manage level
Parameters
none
: Performs no authentication.
password
: Performs local password authentication.
scheme
: Performs AAA authentication. For more information about AAA, see
Security Configuration
Guide.
Description
Use the
authentication-mode
command to set the authentication mode for the user interface.
Use the
undo authentication-mode
command to restore the default.
By default, the authentication mode for VTY user interfaces is
password
, and for AUX user interfaces is
none
.
Related commands:
set authentication password
.
Examples
# Specify that no authentication is needed for VTY 0. (This mode is insecure.)
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] authentication-mode none
Summary of Contents for A7500 Series
Page 7: ...v Index 210 ...
