102
the newly configured upper limit is 4, when there is a new configuration file to be saved, the system
deletes 4 oldest files, where 4 = 7-4+1.
Before executing this command, configure the path and filename prefix for saving configuration files by
using the
archive configuration location
command; otherwise, the execution of this command fails.
If you execute the
undo
archive configuration location
command, the maximum number of configuration
files that can be saved also restores to the default.
Examples
# Set the maximum number of configuration files that can be saved to 10.
<Sysname> system-view
[Sysname] archive configuration max 10
backup startup-configuration
Syntax
backup startup-configuration to
dest-addr
[
dest-filename
]
View
User view
Default level
2: System level
Parameters
dest-addr
: IP address or name of a TFTP server. The address cannot be an IPv6 address.
dest-filename
: Target filename used to save the startup configuration file on the server.
Description
Use the
backup startup-configuration
command to back up the startup configuration file to a specified
TFTP server. If you do not specify this filename, the original filename is used.
The device uses TFTP to back up configuration files.
Examples
# Back up the startup configuration file of the device to the TFTP server with IP address 2.2.2.2, using
filename
192-168-1-26.cfg
.
<Sysname> backup startup-configuration to 2.2.2.2 192-168-1-26.cfg
Backup next startup-configuration file to 2.2.2.2, please wait…finished!
<Sysname>
After the above operation, the device backs up file
test.cfg
to TFTP server 2.2.2.2, where the file is saved
as
192-168-1-26.cfg
.
configuration replace file
Syntax
configuration replace
file
filename
View
System view
Summary of Contents for A7500 Series
Page 7: ...v Index 210 ...
