34
Examples
# Send message
hello abc
to the AUX user interface 0.
<Sysname> send aux 0
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:
hello abc^Z
Send message? [Y/N]:y
<Sysname>
***
***
***Message from aux0 to aux0
***
hello abc
<Sysname>
# Assume you are using VTY 0. Before you restart the device, to inform users that are accessing the
device through other user interfaces, perform the following steps.
•
Display information about all users
<Sysname> display users
The user application information of the user interface(s):
Idx UI Delay Type Userlevel
+ 18 VTY 0 00:00:00 TEL 3
19 VTY 1 00:00:03 TEL 3
Following are more details.
VTY 0 :
Location: 192.168.1.26
VTY 1 :
Location: 192.168.1.20
+ : Current operation user.
F : Current operation user work in async mode.
// The output shows that a user is using VTY 0.
<Sysname> send vty 1
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:
Note please, I will reboot the system in 3 minutes!^Z
Send message? [Y/N]:y
// A message is sent to VTY 1, telling that the system will reboot in 3 minutes.
•
If a user is trying to log in through VTY 1, the message appears. (VTY 1 receives the message from
VTY 0 when the
interface GigabitEthernet
command is input.)
[Sysname] interface gigabiteth
***
***
***Message from vty0 to vty1
***
Summary of Contents for A7500 Series
Page 7: ...v Index 210 ...
