manualshive.com logo in svg

HP 6125G, Command Reference Manual, Page: 74 / 426

Share
Download
HP 6125G Command Reference Manual Download Page 74

 

62

 

group

 

group-address

: Displays information about the hosts tracked by IGMP that join in the specified 

IGMP group on the Layer 2 ports. 

group-address 

is in the range of 224.0.1.0 to 239.255.255.255. 

source

 

source-address

: Displays information about the hosts tracked by IGMP that join in the specified 

multicast source on the Layer 2 ports, where 

source-address 

is a valid unicast address or 0.0.0.0. A 

source IP address of 0.0.0.0 specifies all multicast sources. 

slot

 slot-number

: Displays information about the hosts tracked by IGMP on the Layer 2 ports on the 

specified IRF member switch. The 

slot-number

 argument specifies the ID of an IRF member switch. The 

value range for the argument depends on the number of member switches and their member IDs in the 

IRF fabric. If no IRF fabric exists, the 

slot-number

 argument is the current device number. 

|

: Filters command output by specifying a regular expression. For more information about regular 

expressions, see 

Fundamentals Configuration Guide

. 

begin

: Displays the first line that matches the specified regular expression and all lines that follow. 

exclude

: Displays all lines that do not match the specified regular expression. 

include

: Displays all lines that match the specified regular expression. 

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. 

Description 

Use 

display igmp host port-info 

to display information about the hosts tracked by IGMP on the Layer 2 

ports. 

Examples 

# Display information about the hosts tracked by IGMP that join in IGMP group 224.1.1.1 on the Layer 2 

ports in VLAN 2.  

<Sysname> display igmp host port-info vlan 2 group 224.1.1.1 

VLAN(ID) : 2 

  (0.0.0.0, 224.1.1.1) 

    Port : GigabitEthernet1/0/1 

      Host                                    Uptime          Expires 

      1.1.1.1                                 00:02:20        00:00:40 

      2.2.2.2                                 00:02:21        00:00:39 

    Port : GigabitEthernet1/0/2 

      Host                                    Uptime          Expires 

      3.3.3.3                                 00:02:20        00:00:40 

Table 15

 

Command output 

Field Description 

(0.0.0.0, 224.1.1.1) 

(S, G) entry, where 0.0.0.0 indicates all multicast sources 

Port Member 

port 

Host 

Host IP address 

Uptime 

Host running duration 

Expires 

Host expiration time, where 

timeout

 means that the host has expired 

 

Summary of Contents for 6125G











































































































































































































































































































































































































































Reviews:

No comments