268
MLD configuration commands
The term "router" in this document refers to both routers and Layer 3 switches.
display mld group
Syntax
display mld group
[
ipv6-group-address
|
interface
interface-type interface-number
] [
static
|
verbose
]
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-group-address
: Specifies an MLD group address, in the range of FFxy::/16 (excluding FFx0::/16,
FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal number ranging from 0 to
F. If you do not specify any IPv6 multicast group address, this command displays the information of all
MLD groups.
interface
interface-type interface-number
: Displays the information of MLD groups on the specified
interface. If you do not specify
interface-type interface-number
, the command displays the MLD group
information on all the interfaces.
static
: Displays the information of static MLD group entries. If you do not specify this keyword, the
command displays the dynamic MLD group entries.
verbose
: Displays detailed information of MLD groups.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use
display mld group
to display information about MLD groups.
Examples
# Display detailed information about dynamically joined MLD groups on all interfaces.
<Sysname> display mld group verbose
Interface group report information
Vlan-interface1(FE80::101)
Total 1 MLD Groups reported
Group: FF03::101
