manualshive.com logo in svg

HP 6125G, Command Reference Manual, Page: 13 / 426

Share
Download
HP 6125G Command Reference Manual Download Page 13

1 

IGMP snooping configuration commands 

display igmp-snooping group 

Syntax 

display igmp-snooping group

 [ 

vlan

 

vlan-id 

] [ 

slot

 

slot-number

 ] [ 

verbose

 ] [ 

|

 { 

begin

 | 

exclude

 | 

include

 } 

regular-expression

 ] 

View 

Any view 

Default level 

1: Monitor level 

Parameters 

vlan

 

vlan-id

: Displays the IGMP snooping group information in the specified VLAN, where the 

vlan-id 

argument is in the range of 1 to 4094. If you do not specify a VLAN, this command displays the IGMP 

snooping group information in all VLANs.  

slot

 slot-number

: Displays the IGMP snooping group information on the specified IRF member switch. The 

slot-number

 argument specifies the ID of an IRF member switch. The value range for the argument 

depends on the number of member switches and their member IDs in the IRF fabric. If no IRF fabric exists, 

the 

slot-number

 argument is the current device number. 

verbose

: Displays the detailed IGMP snooping group information. 

|

: Filters command output by specifying a regular expression. For more information about regular 

expressions, see 

Fundamentals Configuration Guide

. 

begin

: Displays the first line that matches the specified regular expression and all lines that follow. 

exclude

: Displays all lines that do not match the specified regular expression. 

include

: Displays all lines that match the specified regular expression. 

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. 

Description 

Use 

display

 

igmp-snooping

 

group 

to display IGMP snooping group information, including both dynamic 

entries and static entries.  

Examples 

# Display detailed IGMP snooping group information in VLAN 2.  

<Sysname> display igmp-snooping group vlan 2 verbose 

  Total 1 IP Group(s). 

  Total 1 IP Source(s). 

  Total 1 MAC Group(s). 

  Port flags: D-Dynamic port, S-Static port, C-Copy port, P-PIM port 

  Subvlan flags: R-Real VLAN, C-Copy VLAN 

  Vlan(id):2. 

    Total 1 IP Group(s). 

Summary of Contents for 6125G











































































































































































































































































































































































































































Reviews:

No comments