manualshive.com logo in svg

HP 6125G, Command Reference Manual, Page: 130 / 426

Share
Download
HP 6125G Command Reference Manual Download Page 130

 

118 

Field

 

Description

 

Priority

 

RP priority.

 

HoldTime 

RP timeout time. 

Uptime

 

Length of time for which the RP has been up, in hh:mm:ss.

 

Expires

 

Length of time in which the RP will expire, in hh:mm:ss.

 

RP mapping for this group

 

IP address of the RP that serves the current multicast group. 

 

 

dscp (PIM view) 

Syntax 

dscp 

dscp-value

 

undo dscp 

View 

PIM view 

Default level 

2: System level 

Parameters 

dscp-value

: Specifies the DSCP value for PIM messages, in the range of 0 to 63. 

Description 

Use 

dscp

 to set the DSCP value for PIM messages. 

Use 

undo dscp

 to restore the default. 

The default DSCP value in PIM messages is 48. 

Examples 

# Set the DSCP value to 63 for PIM messages. 

<Sysname> system-view 

[Sysname] pim 

[Sysname-pim] dscp 63 

hello-option dr-priority (PIM view) 

Syntax 

hello-option dr-priority

 

priority

 

undo hello-option dr-priority 

View 

PIM view 

Default level 

2: System level 

Summary of Contents for 6125G











































































































































































































































































































































































































































Reviews:

No comments