manualshive.com logo in svg

HP 6125G, Command Reference Manual, Page: 123 / 426

Share
Download
HP 6125G Command Reference Manual Download Page 123

 

111 

Default level 

1: Monitor level 

Parameters 

mode

: Displays the information of join/prune messages to send in the specified PIM mode. PIM modes 

include 

sm

 and 

ssm

, which represent PIM-SM and PIM-SSM respectively.  

flags

 flag-value

: Displays routing entries that contain the specified flag. Values and meanings of 

flag-value

 are as follows:

 

 

•

 

rpt

: Specifies routing entries on the RPT. 

•

 

spt

: Specifies routing entries on the SPT. 

•

 

wc

: Specifies wildcard routing entries. 

interface-type

 

interface-number

:  Displays  the  information  of  join/prune  messages  to  send  on  the 

specified interface.  

neighbor-address

:  Displays  the  information  of  join/prune  messages  to  send  to  the  specified  PIM 

neighbor.  

verbose

: Displays the detailed information of join/prune messages to send.  

|

: Filters command output by specifying a regular expression. For more information about regular 

expressions, see 

Fundamentals Configuration Guide

. 

begin

: Displays the first line that matches the specified regular expression and all lines that follow. 

exclude

: Displays all lines that do not match the specified regular expression. 

include

: Displays all lines that match the specified regular expression. 

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. 

Description 

Use 

display pim join-prune 

to display information about the join/prune messages to send.  

Examples 

# View the information about join/prune messages to send in the PIM-SM mode.  

<Sysname> display pim join-prune mode sm 

 

 Expiry Time: 50 sec 

 Upstream nbr: 10.1.1.1 (Vlan-interface1) 

 1 (*, G) join(s), 0 (S, G) join(s), 1 (S, G, rpt) prune(s) 

 ------------------------------------------------------------------------- 

 Total (*, G) join(s): 1, (S, G) join(s): 0, (S, G, rpt) prune(s): 1 

Table 27

 

Command output 

Field

 

Description

 

Expiry Time: 

Expiry time of sending join/prune messages  

Upstream nbr:

 

IP address of the upstream PIM neighbor and the interface that connects to it

 

(*, G) join(s)

 

Number of (*, G) joins to send 

 

(S, G) join(s)

 

Number of (S, G) joins to send 

 

(S, G, rpt) prune(s)

 

Number of (S, G, rpt) prunes 

 

 

Summary of Contents for 6125G











































































































































































































































































































































































































































Reviews:

No comments