319
Field
Description
PIM override interval (configured)
Configured prune override interval
PIM neighbor tracking (negotiated)
Negotiated neighbor tracking status
(enabled/disabled)
PIM neighbor tracking (configured)
Configured neighbor tracking status
(enabled/disabled)
PIM generation ID
Generation_ID value
PIM require generation ID
Rejection of hello messages without Generation_ID
(enabled/disabled)
PIM hello hold interval
IPv6 PIM neighbor timeout time
PIM assert hold interval
Assert timeout time
PIM triggered hello delay
Maximum delay of sending hello messages
PIM J/P interval
Join/prune interval
PIM J/P hold interval
Join/prune timeout time
PIM BSR domain border
Status of PIM domain border configuration
(enabled/disabled)
Number of routers on network not using DR priority
Number of routers not using the DR priority field on the
subnet where the interface resides
Number of routers on network not using LAN delay
Number of routers not using the LAN delay field on the
subnet where the interface resides
Number of routers on network not using neighbor
tracking
Number of routers not using neighbor tracking on the
subnet where the interface resides
display pim ipv6 join-prune
Syntax
display pim ipv6 join-prune mode
{
sm
[
flags
flag-value
]
|
ssm
} [
interface
interface-type
interface-number
|
neighbor
ipv6-neighbor-address
] * [
verbose
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
mode
: Displays the information of join/prune messages to send in the specified IPv6 PIM mode. IPv6 PIM
modes include
sm
and
ssm
, which represent IPv6 PIM-SM and IPv6 PIM-SSM respectively.
flags
flag-value
: Displays IPv6 PIM routing entries that contain the specified flags. Values and meanings
of
flag-value
are as follows:
•
rpt
: Specifies routing entries on the RPT.
•
spt
: Specifies routing entries on the SPT.
•
wc
: Specifies wildcard routing entries.
