HP 6125G, Command Reference Manual, Page: 140 / 426

128
Default level
2: System level
Parameters
None
Description
Use pim hello-option neighbor-tracking to disable join suppression—namely, enable neighbor
tracking—on the current interface.
Use
undo pim hello-option neighbor-tracking to enable join suppression.
By default, join suppression is enabled. Namely, neighbor tracking is disabled.
Related commands:
hello-option neighbor-tracking .
Examples
# Disable join suppression on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option neighbor-tracking
pim hello-option override-interval
Syntax
pim hello-option override-interval interval
undo pim hello-option override-interval
View
Interface view
Default level
2: System level
Parameters
interval : Prune override interval in milliseconds, with an effective range of 1 to 65,535.
Description
Use pim hello-option override-interval to configure the prune override interval on the current interface.
Use undo pim hello-option override-interval to restore the default.
By default, the prune override interval is 2500 milliseconds.
Related commands:
hello-option lan-delay , hello-option override-interval , and pim hello-option
lan-delay .
Examples
# Set the prune override interval to 2000 milliseconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option override-interval 2000