Section 5 – Programming
5–69
5. Press
the
or
button until the equal sign is adjacent to the
Use Defaults
option. See Table 5–
11 for description.
6. Press
ENTER
MENU
.
7. Press
the
or
button until the equal sign highlights the desired Device number.
8. Press
the
or
ENTER
MENU
button to toggle between Y (yes) or N (no). Yes means you wish to program
this device back to default.
When all the device numbers (of the devices you wish to program to factory defaults) are chosen.
Warning:
The following step cannot be undone.
9. Press
.
5.5.5.2 Copy the Programming of an Existing Device to Another
1. Enter Program Mode (see section 5.1).
2. Press
2
for Line Device menu.
3. Press
1
(MX8000–LC3),
2
(MX8000–LRR), or
3
(MX8000–LC1) to select your line card type.
4. Press
3
for copy Line Device menu.
5. Press
the
or
button until the equal sign is adjacent the
Copy Existing
option. See Table 5–11
for description.
6. Press
ENTER
MENU
.
7. Press
the
or
button until the equal sign highlights the desired Source Device number.
8. Press
ENTER
MENU
.
9. Press
the
or
button until the equal sign highlights the desired Target Device number.
10. Press the
or
ENTER
MENU
button to toggle between Y (yes) and N (no). Yes means you wish to program
this line device with the programming of the line device chosen as the source.
11. Repeat steps 8 & 9 until all the line card numbers (of the Lines you wish to program to factory defaults)
are chosen.
Warning:
The following step cannot be undone.
12. Press
.
