MX8000 Installation and Operation Guide
5–52
5. When the desired setting is flashing press
ENTER
MENU
.
6. To
exit
press
.
How to Set CID Monitor
Caller ID Monitor allows the selection of different modes for decoding Caller ID. These are:
•
Normal
(or standard) where the detection method is first ring, delay, preamble, marks, and then Caller
ID data.
•
Preamble
where the Caller ID chip looks for preamble data prior to Caller ID.
•
DTMF
where the system looks for DTMF based Caller ID data. (This is a non-standard method of Caller
ID.
•
Marks
where the Caller ID chip looks for a Marks signal prior to the Caller ID data.
Note:
This option is will only be applicable when Caller ID has been selected.
1. Follow the procedures in Section 5.5.2.
2. Press
7
for Line Gain Opt. menu (see Figure 5–21).
3. Press
the
.
The display Flashes on the
Mon=
field.
4. Press
the
or
button to change the CID monitor.
5. When the desired setting is flashing press
ENTER
MENU
.
6. To
exit
press
.
How to Set CID Gain
Caller ID gain sets the gain of the Caller ID receive logic.
Note:
This option is will only be applicable when Caller ID has been selected.
1. Follow the procedures in Section 5.5.2.
2. Press
7
for Line Gain Opt. menu (see Figure 5–21).
3. Press
the
.
The display Flashes on the
Gain=
field.
4. Press
the
or
button to change the CID Gain.
5. When the desired setting is flashing press
ENTER
MENU
.
6. To
exit
press
.
