MX8000 Installation and Operation Guide
5–46
To Edit a Listen-In Account
1. Press
2
.
2. Press
the
or
button until the desired listen in account is highlighted by the equal sign.
3. Press
ENTER
MENU
.
4. Enter the revised account number you wish to the account list. See Table 5–14.
5. Press
ENTER
MENU
.
Note:
When editing an existing account it must be completely re-entered.
To Clear a Listen-In Account
1. Press
3
.
2. Press
the
or
button until the desired listen in account is highlighted by the equal sign.
3. Press
ENTER
MENU
.
The Display will read:
< WARNING! >
Delete Record No
4. Press
the
or
button to toggle to Yes.
Note:
Additional presses of the up or down arrow will toggle the choice between “yes” and “no”.
5. Press
ENTER
MENU
.
5.5.2.5 Misc. Line Opt.
Some phone lines may use echo suppression, a billing
delay feature, a hunt group or you may need to set
various ring options. These miscellaneous phone options
can be set through this programming menu.
To Change the Echo Suppress Setting:
If echo suppression is enabled (Y) a 2025Hz signal will be
output for two seconds to disable echo suppression
equipment. This option should be used only for panels
that require a 2225Hz handshake.
1. Follow the procedures in Section 5.5.2.
<Edit Line :01>
5 Misc. Line Opt.
6 Ademco Auto Opt.
7 Line Gain Opt.
Echo Spr=N Call ID=Y
BillDly=N HntGrp=00
<Ring Opt> HngUp=120
<Echo Suppress<=Exit>
5
Figure 5–18: MX8000–LC3 Miscellaneous Phone
Line Options
2. Press
5
for Miscellaneous Line Options menu (see Figure 5–18).
The display Flashes on the
Echo Spr=
field.
3. Press
the
or
button to change the echo suppress option from Y (Yes) to N (No) or vice versa.
4. When the setting is flashing press
ENTER
MENU
.
