Section 5 – Programming
5–57
5.5.4.1 Handshake
Sequence
Each line card is intelligent enough to determine
what format is being sent from a reporting panel. You
only need to program the handshake order and
parameters for each line. A line will initiate up to six
different types of handshake tone groups. The order in
which the receiver sends out these handshake signals
can be changed in this program location for each line
card. Table 6–1 in Section 6 lists the proper
handshake to use for the type of communication
format you are using with a panel.
Follow these steps to change the handshake order and
or the parameters associated with the handshake.
Delay=002 Dur=010
Wait=025 AckDur=080
<Seq # <=Exit>
<Edit Line: 01>
1=Handshake Seq.
2 Pulse Format
3 Line Options
¯
Hs=
1
Gr=1400_2300–2
1
Figure 5–23: MX8000–LC1 Handshake Sequence
Menu
To Change the Handshake Sequence Number:
Handshake sequence sets the order in which the receiver will send out handshakes.
1. Follow the procedures in Section 5.5.4.
2. Press
1
for handshake sequence menu.
When display flashes on the
Hs#
(see Figure 5–23).
3. Press
the
or
button to change the ordered
handshake number.
1 = the first handshake tone sent 2 = the second
handshake tone to be sent and so on.
Delay=002 Dur=010
Wait=025 AckDur=080
<Seq # <=Exit>
Hs=
1
Gr=1400_2300–2
Figure 5–24: MX8000–LC1 Handshake Order
Number
4. When the desired order number is flashing press
ENTER
MENU
or
.
The display will start flashing the format group field.
To Change the Format Group:
1. Follow the procedures in Section 5.5.4.
2. Press
1
for handshake sequence menu.
3. Press
until the display flashes on the Format Group field. See Table 5–11 for valid entries.
4. Press
the
or
button to change the format group. See Table 6–1 in Section 6 for your
communication format.
5. When the desired format group is flashing press
ENTER
MENU
or
.
To Change the Handshake Delay Time:
This is the duration of time that the receiver will wait before it sends its handshake tone. See Table 5–11 for
valid entries.
1. Follow the procedures in Section 5.5.4.
2. Press
1
for handshake sequence menu.
3. Press
until the display flashes on the
Delay
field.
