MX8000 Installation and Operation Guide
5–64
To Add a Listen-In Account
Note:
Panels that send listen-in commands (Contact ID E606
or SIA LF and LE) as part of their message do not need their
account number in an account list.
1. Press
1
.
The display briefly shows the number (indicated by
XX
) of
the lowest available listen in account number slot (20
total listen in account numbers [strings]).
Adding # XX
Note:
The account numbers may contain wild card entries
(* and #) described in Table 5–14. Therefore, the 20
account numbers are actually up to 20 unique strings.
Mode=Not Used
Timeout=000
<Listen Mode <=Exit>
<Listen In Accounts>
1=Add Account
2 Edit Account
3 Clear Account
¯
<Account List>
1
ENTER
MENU
Figure 5–27: MX8000–LC1 Listen In
Accounts Menu
2. Enter the account number you wish to add to the listen in account list.
3. When the desired account number is flashing press
ENTER
MENU
.
To Edit a Listen-In Account
1. Press
2
.
2. Press
the
or
button until the desired listen in account is highlighted by the equal sign.
3. Press
ENTER
MENU
.
4. Enter the revised account number you wish to the account list. See Table 5–14 on page 5–45.
5. Press
ENTER
MENU
.
Note:
When editing an existing account it must be completely re-entered.
To Clear a Listen-In Account
1. Press
3
.
2. Press
the
or
button until the desired listen in account is highlighted by the equal sign.
3. Press
ENTER
MENU
.
The Display will read:
< WARNING! >
Delete Record No
4. Press
the
or
button to toggle to Yes.
Note:
Additional presses of the up or down arrow will toggle the choice between “yes” and “no”.
5. Press
ENTER
MENU
.
