manualshive.com logo in svg

Honeywell MX8000, Installation And Operation Manual

The Honeywell MX8000 is a cutting-edge system designed for efficient and reliable performance. Ensure seamless installation and smooth operations with our comprehensive Installation and Operation Manual. Download this user-friendly manual for free from our website to unlock the full potential of your MX8000 experience.

Share
Download
background image

MX8000 Installation and Operation Guide 
 

 

1–4

 

1.6 Terminology 

This section lists terminology that is specific to this product and their meaning. 

Term Meaning 

ACK Stands 

for 

acknowledgment. 

Automation Protocol 

The format used for messages sent between the receiver and the automation 
computer. 

Communication Group 

The different types of communication are separated by handshake type. These 
handshake types can be assigned in a numbered order. (See Section 5 for more 
details.) 

Heartbeat 

A supervisory signal that continually tests the communication link between the 
automation computer and the receiver. 

Listen-in 

Listen-in is the ability to listen in to what is happening real-time from the central 
station to a remote location. This can help the central station operator determine if he 
or she should dispatch for a particular alarm situation. 

Main Menu 

The main menu will be displayed as either <Installer Menu> or <Operator Menu>. 
However, this manual will refer to them as the main menu. 

MCPU 

Master Central Processing Unit. 

NACK 

Stands for no acknowledgment. 

PIN 

An abbreviation for Personal Identification Number. PINs are used to log in and out 
of the receiver. 

PZT 

PZT is an abbreviation for a piezo alert sounder. 

SBUS 

Serial Bus interface to connect a MX8000 receiver to line cards, the VFD display and 
additional MX8000 receivers via rear panel connectors. 

VFD 

Stands for Vacuum Fluorescent Display. This is the type of message display used on 
the receiver. 

VPN 

Stands for Virtual Private Network. VPN is a feature available with the MX8000-LRR 
line card and allows an increase in the number of accounts (in increments of 10,000) 
that can report to one LRR. When this feature is not used, the number of accounts 
that can report to one LRR is limited to 10,000. 

1.7  What’s in the Box 

This section contains a list of the parts that are shipped with the MX8000 receiver and a brief description of 
their intended use. 

Item Quantity 

Description 

Battery/Alert Relay Wiring 
Harness 

1 

Wiring harness used to connect the MX8000 receiver to a backup 
battery. It also provides a normally open or normally closed output 
for an alert sounder. 

MX8000 Installation and 
Operation Guide 

1 

A manual covering installation and operation information related to 
the MX8000 receiver. 

Digital Alarm Receiver 

1 

The digital alarm receiver assembly. 

Line Card (See Note) 

1 

Line card for land lines. 

Strain Relief Tie Wrap 

1 

Tie wrap used as a strain relief on the phone cord. See Figure 3–3 
for location of strain relief tabs. 

Receiver Mounting Screws  4 

#10-32 x 3/8 flat head screws used to mount the receiver to a UL 
Listed rack. (See Section 3.5 for rack mounting instructions.) 

Power Cable 

1 

AC power cable used to connect the MX8000 receiver to an AC wall 
plug. 

Note:

  The system is shipped with either of two line cards dependent on the system ordered. If the MX8000-1 is 

ordered, the line card included is an MX8000-LC1 single line card. If an MX8000-3 is ordered, the line 
card included is an MX8000-LC3 tri-line card. 

Summary of Contents for MX8000

































































































































































































Reviews:

No comments

Related manuals for MX8000

Majestic 90 Instructions For Care And Operation preview
90
Brand: Majestic Pages: 9
Raymarine AIS700 Installation Instructions Manual preview
AIS700
Brand: Raymarine Pages: 52
K-PO DX-5000 PLUS Manual preview
DX-5000 PLUS
Brand: K-PO Pages: 17
Icom IC-F3023T/S Instruction Manual preview
IC-F3023T/S
Brand: Icom Pages: 32
Magnadyne LS4500W Owner'S Manual preview
LS4500W
Brand: Magnadyne Pages: 16
SkyGuardTWX 978 UAT/1090 ES Setup preview
978 UAT/1090 ES
Brand: SkyGuardTWX Pages: 2
DAB SmartDAB Installation & User Manual preview
SmartDAB
Brand: DAB Pages: 8
nologo RX2-XL Quick Start Manual preview
RX2-XL
Brand: nologo Pages: 10
Extron electronics MTP C7 15HD Series Specifications preview
MTP C7 15HD Series
Brand: Extron electronics Pages: 3
Lafayette LR-9090 Owner'S Manual preview
LR-9090
Brand: Lafayette Pages: 30
Dish Network DuoDVR ViP 922 User Manual preview
DuoDVR ViP 922
Brand: Dish Network Pages: 26
Optimus 31-3045 Owner'S Manual preview
31-3045
Brand: Optimus Pages: 40
B&K AVR505 Owner'S Manual preview
AVR505
Brand: B&K Pages: 88
Icom i2725E Instruction Manual preview
i2725E
Brand: Icom Pages: 96
Olson Technology OTLT 3000 Instruction Manual preview
OTLT 3000
Brand: Olson Technology Pages: 12
Majestic SV 517 RDS/BT DAB Manual preview
SV 517 RDS/BT DAB
Brand: Majestic Pages: 13
HiTV Ture TV User Manual preview
Ture TV
Brand: HiTV Pages: 28
Arris VIP5602WT Installation Manual preview
VIP5602WT
Brand: Arris Pages: 24

Brands by name

Popular brands

Load more brands