Section 5 – Programming
5–53
How to Set On Hook Gain
On hook gain sets the analog receive Caller ID gain prior to line pickup.
Note:
This option is will only be applicable when Caller ID has been selected.
1. Follow the procedures in Section 5.5.2.
2. Press
7
for Line Gain Opt. menu (see Figure 5–21).
3. Press
the
.
The display Flashes on the
OHGain=
field.
4. Press
the
or
button to change the On Hook Gain.
5. When the desired setting is flashing press
ENTER
MENU
.
6. To
exit
press
.
How to Set Ringer Impedance
Ringer Impedance allows the impedance the Caller ID chip presents to the phone line to be set for either
High or Synthesize.
Note:
This option is will only be applicable when Caller ID has been selected.
1. Follow the procedures in Section 5.5.2.
2. Press
7
for Line Gain Opt. menu (see Figure 5–21).
3. Press
the
.
The display Flashes on the
RImp=
field.
4. Press
the
or
button to change the Ringer Impedance.
5. When the desired setting is flashing press
ENTER
MENU
.
6. To
exit
press
.
5.5.3 Edit
Line
– MX8000–LRR
To edit an existing Line, follow these steps:
1. Log on to the receiver. (See Section 4.4.4 for log on procedure.)
2. Press
ENTER
MENU
button.
3. Press
7
for program menu.
The display will briefly display
Initializing
Please wait . . .
4. Press
2
to choose Line Device menu.
5. Press
2
to select MX8000–LRR.
