Section 5 – Programming
5–51
3. Press
.
The display Flashes on the
Pls=
field.
4. Press
the
or
button to change the option from Extended to Not Extended or vice versa.
5. When the desired setting is flashing press
ENTER
MENU
.
6. To
exit
press
.
How to Set Extended Output
Note:
This field will only be active when the Pulse Extended option above has been set to Extended.
1. Follow the procedures in Section 5.5.2.
2. Press
6
for Ademco Auto Opt. menu (see Figure 5–20).
3. Press
.
The display Flashes on the
ExtOut=
field.
4. Press
the
or
button to change the option from High Speed to 4/2 or vice versa.
5. When the desired setting is flashing press
ENTER
MENU
.
6. To
exit
press
.
5.5.2.7 Line
Gain
Opt.
This selection is used to select the gain for transmit and
receive for a line.
How to Set Transmit Gain
1. Follow the procedures in Section 5.5.2.
2. Press
7
for Line Gain Opt. menu (see Figure 5–21).
The display Flashes on the
Xmit=
field.
3. Press
the
or
button to change the transmit
gain.
7 Line Gain Opt.
Xmit=-8db Rec=6db
<TransmitGain<=Exit>
7
<Edit Line :01>
< Exit Menu
OHGain=7.0db RImp=HI
Mon=Norm Gain=2.0db
Figure 5–21: MX8000–LC3 Line Gain Options
4. When the desired setting is flashing press
ENTER
MENU
.
How to Set Receive Line Gain
1. Follow the procedures in Section 5.5.2.
2. Press
7
for Line Gain Opt. menu (see Figure 5–21).
3. Press
the
button.
The display Flashes on the
Rec=
field.
4. Press
the
or
button to change the receive gain.
