Honda CBR125R, Owner'S Manual

Page: 41 / 430

BODY PANELS/EXHAUST SYSTEM
2-3
SERVICE INFORMATION
GENERAL
• This section covers removal and installation of the body panels and exhaust system.
• Serious burns may result if the exhaust system is not allowed to cool before components are removed or serviced.
• Always replace the exhaust pipe gasket with new ones after removing the exhaust pipe from the engine.
• When installing the exhaust system, loosely install all of the exhaust pipe fasteners. Always tighten the exhaust pipe
joint nuts first, then tighten the mounting bolts.
• Always inspect the exhaust system for leaks after installation.
TORQUE VALUES
TROUBLESHOOTING
Excessive exhaust noise
• Broken exhaust system
• Exhaust gas leak
Poor performance
• Deformed exhaust system
• Exhaust gas leak
• Clogged muffler
Grab rail mounting bolt 27 N·m (2.8 kgf·m, 20 lbf·ft)
Turn signal light mounting nut 8.8 N·m (0.9 kgf·m, 6.5 lbf·ft)
Muffler joint bolt 13 N·m (1.3 kgf·m, 10 lbf·ft)
Exhaust pipe cover bolt 13 N·m (1.3 kgf·m, 10 lbf·ft)
Exhaust pipe stud bolt – See page 2-17