Honda CBR125R, Owner'S Manual

Page: 322 / 430

REAR WHEEL/SUSPENSION
14-8
ASSEMBLY
Never install the old
bearing, once the
bearing has been
removed, the
bearing must be
replaced with new
ones.
Drive in a new right side bearing squarely with its
marked side facing up until it is fully seated.
Install the distance collar.
Drive in a new left side bearing squarely with its
marked side facing up until it is seated on the dis-
tance collar.
Apply grease to the driven flange bearing rotating
area.
Drive in a new driven flange bearing squarely with
its sealed side facing up until it is fully seated.
BEARING (6301UU)
BEARING (6003)
DAMPER RUBBER
O-RING
DISTANCE
COLLAR
DRIVEN FLANGE
COLLAR
BEARING (6301UU)
DUST SEAL
BRAKE DISC
DUST SEAL
64 N·m (6.5 kgf·m,
47 lbf·ft)
42 N·m (4.3 kgf·m, 31 lbf·ft)
TOOLS:
Driver
07749-0010000
Attachment, 37 x 40 mm 07746-0010200
Pilot, 12 mm 07746-0040200
DRIVER
ATTACHMENT
PILOT
DISTANCE
COLLAR
BEARINGS
TOOLS:
Driver
07749-0010000
Attachment, 37 x 40 mm 07746-0010200
Pilot, 17 mm 07746-0040400
DRIVER
ATTACHMENT
PILOT
BEARING